MOTHERBOARD

A motherboard is the main printed circuit board (PCB) in a computer. The motherboard is a computer’s central communications backbone connectivity point, through which all components and external peripherals connect.

ATX Motherboards

The ATX motherboards started in 90’s and are still available. The ATX connector on the motherboard consists of a single connector. These boards are used for P2/P3 or P/4 processors.

IT4nextgen > Computer Hardware > Motherboard:Types and Components Explained

Motherboard:Types and Components Explained

Last Updated March 29, 2017 By Subhash D 27 Comments

Motherboard explained

The motherboard is the main component of any branded or assembled PC, laptop, tablet or a mobile phone. Now you must be curious, why it is called the motherboard? The motherboard is a Printed Circuit Board which acts as the main platform for communication between all other components of a system. All the other computer parts are either directly installed or connected to various motherboard components and all the data is transferred between them through the motherboard.

Different types of motherboards:

AT Motherboards

The oldest of the main boards, these motherboards were used in earlier 286/386 or 486 computers. The AT means the board consists of advanced technology(AT) power connectors. There are two power connectors of 6 pin each mounted on the AT motherboards. The AT motherboards were available in the early 80’s.

 

ATX Motherboards

The ATX motherboards started in 90’s and are still available. The ATX connector on the motherboard consists of a single connector. These boards are used for P2/P3 or P/4 processors.

Motherboard for P1/P2 processors:

 

Pentium 4 motherboard

Also Read: Motherboards with High End Graphics

Motherboard Components

The motherboard consists of various components which have their own role to play in the functioning of a computer. Let us discuss various motherboard components and know their definition and role.

Expansion Slots

ISA slots. These were the oldest expansion slots in the history of motherboards. They were found in AT boards and are identified by black color. Conventional display cards or sound cards were installed in these slots. The full form of ISA is Industry Standard Architecture and is a 16- bit bus.

PCI Slots. The full form of PCI is Peripheral Component Interconnect. The PCI slot is one of the important motherboard components today and is vastly used to install add-on cards on the motherboard. The PCI supports 64-bit high-speed bus.

PCI express. Also known as PCIe, these are the latest and the fastest component of the motherboard to support add-on cards. It supports full duplex serial bus.

AGP slot. Accelerated graphics port(AGP) is specifically used to install a latest graphics card. AGP runs on a 32-bit bus and both PCIe and AGP can be used to install high-end gaming display cards.

RAM(memory) slots

SIMM slots. The full form is a single in-line memory module. These slots were found in older motherboards, up to 486-boards. The SIMM supports 32-bit bus.

DIMM slots. The full form of DIMM is a Double inline memory module. These are the latest RAM slots which run on a faster 64-bit bus. The DIMM used on Laptop boards are called SO-DIMM.

CPU Socket

Another vital motherboard component is the CPU socket which is used to install the processor on the motherboard. Some important sockets are explained below

IDE connector

The Integrated Drive Electronics (IDE) connectors are used to interface disk drives. The 40-pin male connector is used to connect IDE hard disk drives and the 34-pin male connector connects to Floppy Disk Drive.

SATA connector

Latest in the series, the connectors, Serial Advance Technology Attachment(SATA) are 7-pin connectors to interface latest SATA hard disks or optical drives. They are much faster than IDE interface.